Aluminum Sonic snake repeller
Directions for use
Thanks you for purchasing of the aluminum tube snake repeller. With careful use ,this product will give many years of service. Please read the instruction carefully before using for the first time.
How the plastic tube snake repeller works
When inserted into the ground, the product emits low frequency sound which vibrates the ground in a circular pattern. Snake senses the vibration and move away from it. The vibration will be blocked by solid objects, such as building foundation. Covers extends in a circle from the unit. The coverage area depends on the soil type: Heavy clay soil gives the greatest coverage, and light sandy soil gives the lowest coverage.
Before using for the first time
Install batteries: We recommend using high quality batteries. The unit takes 2×D cell batteries. Place in an area covered by loose soil, for example, a vegetable garden or flower bed. Be very careful to ensure the top is securely fitted and therefore watertight.
How to installing in the ground
Dig the hole in the area where the pests are found, don’t hammer the unit into the ground, as this will damage it. Carefully place the unit into the hole, ensuring that the soil comes up to the top of the unit (excluding the removable top).
Battery life
A set of batteries should last 4-6 months. Check reaulary and remove if the ground becomes waterlogged or frozen.
Watch for results
The product is working from the moment you insert in into the ground, but allow around 2 weeks for results to be noticeable. Bear in mind that when trying to change animal behavious, patience and perseverance are sometimes needed. Once the problem is gone, sit back and admire a ‘snake-free’ garden !
Technical data
Working range: 625 square meter.
Frequency: 400Hz-1000Hz
Package:
Model size:41.5x5.6x5.6CM
Box size:42.5X6.0X6.0CM
QTY:20PCS
N.W.:5.6 KGS
G.W.:6.6 KGS
MEAS:44X33X28CM
20FT' : 15540PCS
40FT' : 31080PCS
40HQ : 36320PCS
